Products
| MODEL | GF-H45D | GF-H55D | |
|---|---|---|---|
| FEATURE | MATERIAL TO BE USED | HDPE/LDPE/LLDPE RESIN |
|
| MAX. FILM WIDTH | 450 mm | 550 mm | |
| FILM THICKNESS | 0.008-0.08mm for HDPE; 0.015-0.2mm for LD/LLDPE |
||
| MAX. EXTRUSION OUTPUT | 45 KG/HR | 80 KG/HR | |
| EXTRUDER | SCREW DIAMETER | 45 mm | 55 mm |
| SCREW L/D RATIO | 30 : 1
|
30 : 1 | |
| CYLINDEX BLOWER | 2 SETS | 2 SETS | |
| DRIVIVING MOTOR | 15 HP + INVERTER | 30 HP + INVERTER | |
| HDPE DIES (m/m) | 40/ 60 mm x 2 |
50/70 mm x 2 |
|
| CONTROL PANEL |
TYPE | INDEPENDENT TYPE SWITCH BOARD (BOX) |
|
| TEMPERATURE CONTROL | 7 POINTS | 9 POINTS | |
| COOLING EQUIP |
TYPE | AIR COOLING SYSTEM |
|
| AIR BLOWER | 2 HP x 2 SETS | 3 HP x 2 SETS | |
| TAKE-UP UNIT |
TYPE | TOWER FIXED TYPE |
|
| TAKE-UP ROLLER | 500 mm L x 2 SETS |
600 mm L x 2 SETS | |
| TAKE-UP MOTOR | 1/2 HP + INVERTER | 1/2 HP + INVERTER | |
| TAKE-UP SPEED | 9 x 90 M/ Min. |
||
| STEADY PLATE | 2 SETS WITH GUSSET BOARDS |
||
| GUIDE ROLLER | 500 mm L |
600 mm L | |
| WINDING UNIT |
SURFACE WINDER | MANUAL TYPE, SINGLE STATION WINDER |
|
| EFFECTIVE WIDTH | 450 mm x 2 | 550 mm x 2 | |
| FILM WOUND-UP DIA. | 800 mm | 800 mm | |
| WINDING MOTOR | 20 KG / CM x 2SETS
|
30 KG / CM x 2 SETS | |
| OPTIONAL DEVICE |
AUTO. HOPPER LOADER, SURFACE TREATER, EMBOSSING UNIT, FULLY AUTOMATIC WINDER, AIR SHAFT, DIE ROTARY UNIT, AIR CHILLER, LD/LLDPE DIES & AIRRING, FLEXO. PRINTING PRESS, EPC, TENSION CONTORL, ... ETC. |
||
TEL : 886-5-2200506 (5 Lines) FAX : 886-5-2201955 E-Mail : jandis@ms7.hinet.net ; jandi@ms19.hinet.net
No. 46-1, Chung-Shan Road, Min-Hsiung Industrial District, 621 Chia-Yi Hsien, Taiwan.
www.jandis.com.tw www.inflationmachine.com
Sitemap
COPYRIGHT (C) 2010-2013 JANDIS.COM.TW ALL RIGHTS RESERVED Design by AP Magazine
No. 46-1, Chung-Shan Road, Min-Hsiung Industrial District, 621 Chia-Yi Hsien, Taiwan.
www.jandis.com.tw www.inflationmachine.com
Sitemap
COPYRIGHT (C) 2010-2013 JANDIS.COM.TW ALL RIGHTS RESERVED Design by AP Magazine
