3 Layer Co-Extrusion Inflation Machine GF-L3C-50-55-50



GF-L3C-50-55-50
(A) JANDI'S 3-LAYER MACHINE, FILM WIDTH 600 - 2000 mm (Jan. 01, 2013)
Model 35T 35-45-35 35-50-35 45T 45-55-45 50T 45-65-45 50-55-50 55T 50-65-50
IBC option option option option option option option option option required
Air Chiller option option option option option option suggested suggested suggested required
Height (M) 6 m 7 m 7 m 7 m 7 m 7 m 8.5 m 8.5 m 8.5 m 8.5 m
Total (kg/hr) 72 93 108 135 160 180 230 200 240 260
1:1:1 72 66 66 120 120 165 120 165 216 165
1:2:1 48 80 90 80 160 110 160 144 144 240
1:3:1 40 75 100 66.7 133.3 100 200 120 120 200
Ave. (kg/hr) 53.33 73.7 85.3 88.9 137.8 125.00 160 143 160 201.7
* Recommended film width to be produced:
600mm yes x x x x x x x x x
800mm yes yes yes x x x x x x x
1000mm yes yes yes yes yes yes yes yes yes yes
1200mm x x x yes yes yes yes yes yes yes
1500mm x x x x yes yes yes yes yes yes
1700mm x x x x x x yes yes yes yes
2000mm x x x x x x x x x yes
(B) JANDI'S 3-LAYER MACHINE, FILM WIDTH 1000 - 2700 mm (Jan. 01, 2013)      
Model 50-65-50 55-65-55 65S 65T 65-75-65 65-85-65 65-100-65 65-120-65 75T 75-85-75
IBC suggested required required required required required required required required required
Air Chiller suggested required required required required required required required required required
Height (M) 10 M 10 M 10 M 12.5 M 12.5 M 12.5 M 12.5 M 12.5 M 12.5 M 12.5 M
Total (kg/hr) 260 300 420 480 500 530 560 590 540 570
1:1:1 165 216 360 450 450 450 450 450 480 480
1:2:1 240 240 240 300 320 400 460 500 320 400
1:3:1 200 200 200 250 266.7 333.3 383.3 416.7 266.7 333.3
Ave. (kg/hr) 201.7 218.7 266.7 333.3 345.6 394.4 431.1 455.6 355.6 404.4
* Recommended film width to be produced:
1000mm yes yes yes x x x x x x x
1200mm yes yes yes x x x x x x x
1500mm yes yes yes yes yes yes yes yes yes yes
1700mm yes yes yes yes yes yes yes yes yes yes
2000mm yes yes yes yes yes yes yes yes yes yes
2400mm x yes yes yes yes yes yes yes yes yes
2700mm x x x x x x yes,14M yes,14M yes,14M yes,14M
* Above outputs are the maximum extrusion capacity for different layer ratio 
* Consider the layer ratio to decide the extruder sizes 
* For 1:1:1 production, it is recommended to take 3 sets same size extruders 
* For 1:2:1 & 1:3:1 production, it is recommended to take bigger extruder for the middle layer 
* JANDI'S can also produce the machines according to your special requirements 
* Above information for reference only, JANDI